Home
Project
Description
How to Order
Links
Product
Manual
About Us
 
 
Product Manual
 

Table of Contents

1. Player Mode
     1.1 Playing the course

2. Setup Mode
    
2.1 Recording the pin locations
    2.2 Downloading course information
   




1. Player Mode
  1.1 Playing the course  
Highlight the Player Mode using the up/down arrows. Click the Menu button to select the Player mode.

While standing over your golf ball, allow up to 3 seconds for the display to update with your current distance from the given pin.

Use the down arrow to select the next hole or the up arrow to reverse to a previous hole.


Once your finished playing hole #18, the down arrow will bring you to the End of Round screen. Press the Menu button to return to the main screen.



Back to the top



 2. Setup Mode
 2.1 Recording the pin locations  
Highlight the Setup Mode using the up/down arrows. Then click the Menu button to select the Setup Mode.
Highlight the Sample Hole Positions using the up/down arrows. Click the Menu button to select the Sample Hole Positions Mode.

While standing over the hole, press the Menu button to save the holes current position. The distance will be displayed for 5 seconds to indicate a successful acquisition. The display will then advance to the next hole.

If an error is made, or a hole needs to be resampled, use the up arrow to reverse the display to the previous hole.


Upon completion of the 18th hole, the display will prompt the user to upload the hole information to the PC.

To upload, connect the unit to PC via the TMS Technologies special serial cable. Start the DTP utility on the PC and select the Acquire pins tab. Press the Menu button on the handheld unit to transfer the data to the PC.


Once complete, an Upload Complete message will be displayed. Press the Menu button to return to the main menu.

Back to the top



2. Setup Mode
 2.2 Downloading course information

Highlight the Setup Mode using the up/down arrows. Then click the Menu button to select the Setup Mode.

 

Highlight the Downloading Course Info using the up/down arrows. Click the Menu button to select the Download Course Info Mode.


To upload, connect the unit to PC via the TMS Technologies specialized serial cable. Start the DTP utility on the PC and select the Download Course Information tab. Press the Menu button on the handheld unit to start the transfer of the course information.

Once complete, a Download Complete message will be displayed. Press the Menu button to return to the main screen.




Back to the top